Reference Manual Owner manual

Stakeout Menu
R-281
Offset Staking
Stakeout Offset Staking.
The Offset Staking screen is used to stake the center of a road, the
road edge, the curb/ditch edge, or any offset at fixed intervals. An
existing polyline, alignment, or a specified point range can define the
centerline of the road.
The first Offset Staking
screen is used to define the centerline of the
road that you want to offset stake.
Tap Line… : displays a map of all the polylines and
alignments in the current job. Simply tap the line that
you want to offset stake and then tap
.
To/From… : opens a window where a range of points can
be defined. The points within the specified range will
define the centerline of the road to be offset staked.
Begin Station: is the station assigned to the first point
of the selected polyline or point range.
Backsight… : accesses the Backsight Setup screen (Page
R-114).
Next> : takes you to the second Offset Staking screen.