Reference Manual Owner manual

Stakeout Menu
R-275
Stake List of Points Screen
Stakeout Stake List of Points.
.
The Stake List of Points screen is used to stake points from a
specified list of points. Points can also be selected by description or
polyline.
To/From… : opens a window where a range of points can
be defined. The points within the specified range can
then be staked.
Tap Points… : displays a map of the current job. Simply
tap the points that you want to stake and then tap .
: Allows you to select points using a variety of other
methods including: select all points; all control points; all
non-control points; by description; or by polyline.
Design Point: displays the point to be staked. The
initial Design Point is the first point of the selected
polyline or point range.
Change Design Point… : opens the Edit Point List screen
where the current point list can be edited.
Increment: is the number of points to advance from the Design Point
after tapping Next Point > . (A negative integer can be entered to
have point numbers advance in descending order.)
Next Point > : Advances the Design Point by the Increment and
automatically solves to open the Stake List of Points screen where
you can begin staking the point. The points are advanced in the same
order that they were defined when the polyline was created or when
the point range was defined.
Height of Rod: is the length of the rod.
Backsight… : accesses the Backsight Setup screen (Page R-114).
Solve > : opens the next Stake List of Points screen where the
current Design Point can be staked.