Reference Manual Owner manual

Survey Pro Reference Manual
R-260
Leveling Shots
Leveling Level Turn to Turning Point…. (This screen is also
accessed when taking shots for any other observation type.)
The Leveling Shots
screen is used to perform the required shots to
whichever observation you are shooting. The specific shots you are
prompted for depends on the observation type, the number of sets,
and the shooting sequence.
You will only be prompted to shoot a backsight while
shooting the first observation from any given setup.
The top line indicates if you are shooting your backsight
or foresight, and which point you are shooting in relation
to the entire loop.
The box on the second line tells you which shot to take
next. The term B1 means to shoot the backsight for Set
1. If the box showed F3, it would mean to shoot the
foresight for Set 3, and so on.
Take Shot : takes the shot indicated within the box on
this screen.
Leveling Shot Results
The Shot Results screen opens when you are finished
taking the shot necessary shots for a particular
observation.
Toss : will delete the shot data from the corresponding
set of shots that has the worst residual. Each
consecutive tap of this button will delete the next shot
with the worst residual until all the sets are eventually
deleted.
BS… : allows you to shoot additional shots to the
backsight. You will be prompted to shoot the number of
sets specified in the Level Settings
screen.
FS… : allows you to shoot additional shots to the
foresight. You will be prompted to shoot the number of
sets specified in the Level Settings
screen.