Reference Manual Owner manual

Survey Menu – GPS Module
R-171
• No Data: we are receiving an unknown or a bad response to
commands.
• Recording: a file on the receiver or in the data collector is
open and recording GPS raw data. If this receiver monitors
sessions, this field will display: session in progress when a
session is ongoing.
• Not Recording: no file is open and there is no raw data
recording.
Last Site ID: displays the Site ID of the current session if a session is
in progress. If your receiver does not monitor sessions, the Site ID is
the last Site ID used by Survey Pro.
Interval: displays the current recording interval set in the receiver.
Remaining: displays the time remaining in the current session if a
session is in progress. This field only shows when your receiver times
sessions counting down.
Elapsed: displays the time elapsed since this receiver was put into
static mode, if a session is in progress. This field only shows when
your receiver times sessions counting up.
Free Memory: displays the amount of memory remaining on the disk
where post processing data is stored. This will usually be the
receiver’s built in memory or the receiver’s removable memory card.
For some brands and models, this may be disk space on the data
collector.
HDOP: / VDOP: / Satellites Used: / Satellites Locked: See the
Receiver
card Page R-168.
Sky View
The Sky View card displays a plot of the satellites tracked and the
elevation mask boundary.