Reference Manual Owner manual

Survey Pro Reference Manual
R-158
Stop : stops the total station from tracking or searching.
Turn To : opens the Turn To screen (below) where the total station
can be turned to a specified direction or quickly flipped between face
one and face two.
EDM Mode: allows you to select from various EDM modes. The
options available depend on the total station being used. Consult the
total station’s documentation for more information on the EDM
modes that it supports.
Turn To
Survey Remote Control Turn To.
The Turn To screen is used to turn a robotic total station to a
specified horizontal and zenith angle, or to a specified point.
Horizontal Angle: is the horizontal angle that the total
station will turn to.
Zenith Angle: is the zenith angle that the total station
will turn to.
Turn to Angles : turns the total station to the specified
horizontal and zenith angles.
Existing Point: is the point from the current job that the
total station will turn to.
Turn to Point : turns the total station to the specified
point.
Turn to Backsight : turns the total station to the
backsight point.
Flip : quickly rotates the total station from face one to face two, or
vice versa.
Aim : opens a screen where the instrument can be aimed more
precisely. (Page R-163)
The satellite icon in the Command Bar indicates the status of the
satellite connection when using GeoLock. Tapping this icon will
display a pop-up list with the following items: