Reference Manual User Manual

Survey Pro Reference Manual
R-114
information on adding a modem connection, see Using a
Cellular Phone in the Basic GPS Module section of the User’s
manual.
• IP Address of Base: is the IP address of the base, as provided
by the Internet service.
• Port (Socket) of Base: is the socket number of the base, as
provided by the Internet service.
Change Radio Settings Screen
Job Settings Radio Settings Change Radio Settings.
The Change Radio Settings screen is used to
view the current base radio settings and
change the channel/sensitivity.
Channel: displays the last radio channel when
applicable.
Sensitivity: displays the last radio sensitivity
when applicable.
Baud: displays the baud rate the receiver will
use to communicate with the modem.
Parity: displays the parity the receiver will use
to communicate with the modem.
Configure: is where you can configure the channel the radio will use
to communicate with the other radio and the sensitivity of the radio.
Set : sends commands to the radio firmware to configure the settings
selected on this screen.
Note: some settings on the radio cannot be modified with Survey Pro.
To fully program the radio modems, you need to PC software that
should be supplied with the radio.