User Manual Manual

Projection Utilities
65
Note: If your projection is a localized site, then any errors in the
localization solution will propagate through to the new coordinate
system, possibly degrading precision of the conventionally measured
coordinates.
1. Select all job file points, and select to adjust H and V.
2. Tap and tap to verify the accuracy of the
geodetic to local transformation. Rectify any problem coordinates.
3. Re - open the Readjust Points
screen, select all points, and to
adjust H and V. Tap and . This will
add geodetic coordinates to all the local point records.
4. Set the new projection definition.
5. Re-open the Readjust Points
screen, select all points, tap
to update the local coordinates based on the latest
projection.