User Manual Manual
Roads Menu
R-221
Road Slope Staking
The Road Slope Staking screen is used to locate the catch point of the
road at any station.
: opens the Tap on a Road
screen
where you can tap on any road in the job to
select it.
Name
: displays the name of the selected road.
Begin
Station
: displays the station assigned to
the beginning of the road.
End
Station
: displays the final station in the
road.
: accesses the Backsight Setup
screen (Page R-72).
: takes you to the next Road Slope Staking
screen where the
slope staking parameters are set up.
Road Slope Staking – Screen Two
The second Road Slope Staking screen is used to
set up some slope stake parameters prior to
slope staking the road.
Station
: is the station to be slope staked.
Station Interval
: specifies how far to advance
from the current station to the next station.
: advances the current station by
the
Station Interval
.