User Manual Manual

Survey Pro Reference Manual
R-166
Note: Leaving the
Store Pts
field unchecked and solving the screen
will result in a map screen that displays the points that would be
stored, but without actually storing anything to the job. This is
useful for testing the routine before storing information.
Store Nodes
: When checked, computes offset points that
correspond to each node in the selected alignment (points where the
horizontal or vertical alignment change), or that correspond to the
existing points in a selected line or point range.
Sta. Intervals
: When checked, computes offset points from the
beginning of the selected line or point range, and at each specified
station interval along the line or point range.
Description
: is the description that will be assigned to all points that
are stored.
: computes the offset points, and stores them if the
Store Pts
checkbox is checked.