User Manual Manual

Job Menu
R-63
Points on DTM Layer
The Points on DTM Layer screen displays all the points on the DTM
layer and allows you to add points from another layer or delete (move)
points to a different layer.
: will move the selected point(s) to the
Auxiliary layer. If the Auxiliary layer is not
specified, you will be prompted to select the
layer to move the points to.
Note: Points on a boundary or break-line cannot
be deleted.
: will quickly find and select the specified
point.
: opens the Select Point(s) screen where a point range
can be entered. The points will then be moved to the DTM layer.
: opens the Select Point(s) screen where a point range
can be entered. The points will then be moved to the Auxiliary layer.