Reference Manual Instruction Manual

Using the Web Server

– Deleting a message definition can be done by simply

clicking on the corresponding “trash” sign in the Clear

column on the far right. This deletes the table row.

– There is also a Clear All button under the table that

allows you to delete all message definitions from the

table in one click.

• Click on the Configure button to save all the changes made

and then go back to the Base Setup menu

• Use one of the typical applications described below to

make the generated data available to users:

– Radio transmitter

– Direct IP via modem

– Direct IP via Ethernet

– NTRIP server via modem

– NTRIP server via Ethernet

– RTK corrections delivered on port A, B or F

– Ethernet data streaming.

Radio Transmitter

•

ick on Base Setup > Transmitter and define the general

parameters of the base, as explained in section General

Parameters on page 68. Then proceed with the steps

below.

• Scroll down the page to display the Transmitter frame. In

the Message field, select the type of differential data the

base will generate and the radio will transmit (ATOM,

RTCM, CMR, CMR+ or DBEN). Following your selection,

ProFlex 800

RTK Corrections

Serial Port

ProFlex 800

RTK Corrections

Radio

UHF Connector

External Radio

(Internal)