Reference Manual Instruction Manual

656
Query Command Library
$PASHR,USR,TYP,GGA*xx
Relevant Set
Command
$PASHS,USR,TYP
UTS: GPS Time Synchronization Status
Function This command gives the status of the GPS time
synchronization process. When enabled, this process allows
all measurements and coordinates to be synchronized with
GPS time, and not with the local clock.
Command Format Syntax
$PASHQ,UTS[*cc]
Response Format Syntax
$PASHR,UTS,s*cc
Parameters
Example
$PASHQ,UTS
$PASHR,UTS,ON*0B
Relevant Set
Command
$PASHS,UTS
VCT: Type of Vector Coordinates
Function This command is used to read the type of vector coordinates
the receiver is currently using when outputting VEC/VE2
messages.
Command Format Syntax
$PASHQ,VCT[*cc]
Parameter Description Range
s GPS time synchronization status ON, OFF
*cc Checksum *00-*FF