Reference Manual Instruction Manual

647
Query Command Library
Parameters
Example
$PASHQ,TCP
$PASHR,TCP,MOD=1,LGN=Magellan,PWD=u6huz8,ADD=192.34.76.1,
PRT=8888*7A
See Also $PASHS,TCP,PAR
$PASHS,ETH,PAR
TLT: Tiltmeter Setup
Function This command is used to query the tiltmeter for its setup
data.
Command Format Syntax
$PASHQ,TLT[*cc]
Parameters
None.
Response Format Syntax
Through an example:
$PASHQ,TLT
TILTMETER PARAMETERS SETTINGS
PRTA:OFF INIT_STR:NO TRIG_CMD:*0100P9 INTVL:0005
PRTB:OFF INIT_STR:NO TRIG_CMD:*0100P9 INTVL:0005
PRTF:OFF INIT_STR:NO TRIG_CMD:*0100P9 INTVL:0005
See Also $PASHS,TLT,CMD
Parameter Description Range
s1
TCP/IP connection mode:
• 0: Disabled
• 1: Enabled with authentication
• 2: Enabled without authentication (default)
0-2
s2 Login 32 characters max.
s3 Password 32 characters max.
s4 IP address
0.0.0.0-
255.255.255.255
d5 Port number 0-655535
*cc Checksum *00-*FF