Reference Manual Instruction Manual

646
Query Command Library
SVM: Satellite Use Mask
Function This command is used to read the current setting of the
satellite use mask defining the maximum number of code or
Doppler observations used in the PVT calculation.
Command Format Syntax
$PASHQ,SVM[*cc]
Parameters
None.
Response Format Syntax
$PASHR,SVM,d1*cc
Parameters
Example
$PASHQ,SVM
$PASHR,SVM,25*17
Relevant Set
Command
$PASHS,SVM
TCP: TCP/IP Server Settings
Function This command is used to query the settings of the TCP/IP
server.
Command Format Syntax
$PASHQ,TCP[*cc]
Response Format Syntax
$PASHR,TCP,MOD=s1,LGN=s2,PWD=s3,ADD=s4 ,PRT=d5*cc
Parameter Description Range Default
d1
Maximum number of code/Doppler obser-
vations used in PVT.
0-26 14
*cc Checksum *00-*FF *00-*FF