Reference Manual Instruction Manual

645
Query Command Library
Example
$PASHQ,SOM,WRN
$PASHR,SOM,WRN,ON,ON*42
Relevant Set
Command
$PASHS,SOM,WRN
See Also $PASHS,SOM
STI: Station ID
Function This command is used to query the receiver for the station ID
it transmits to the rover through the corrections message.
Command Format Syntax
$PASHQ,STI[*cc]
Response Format Syntax
$PASHR,STI,d*cc
Parameters
Example
$PASHQ,STI
$PASHR,STI,817*28
Relevant Set
Command
$PASHS,STI
Parameter Description Range
d Station ID
0-1023 (RTCM 2.3)
0-4095 (RTCM 3.x)/ATOM
0-31 (CMR & CMR+)
*cc Checksum *00-*FF