Reference Manual Instruction Manual

642
Query Command Library
Parameters
Example
$PASHQ,SOM,CTT
$PASHR,SOM,CTT,10*67
Relevant Set
Command
$PASHS,SOM,CTT
See Also $PASHS,SOM
SOM,NAV: Navigation Data Mask
Function This command is used to read the current setting of the
navigation data mask applied to signal observations. This
mask is active only when applying masks to signal
observations has been set to be user defined (see
$PASHS,SOM).
Command Format Syntax
$PASHQ,SOM,NAV[*cc]
Parameters
None.
Response Format Syntax
$PASHR,SOM,NAV,s1,s2*cc
Parameter Description Range Default
d1 Mask applied to differential data, in seconds 0-255 10
d2 Mask applied to raw data, in seconds 0-255 10
*cc Checksum *00-*FF