Reference Manual Instruction Manual

629
Query Command Library
SBA: SBAS Tracking Status
Function This command is used to query the SBAS tracking status.
Command Format Syntax
$PASHQ,SBA[*cc]
Response Format Syntax
$PASHR,SBA,s*cc
Parameters
Example
$PASHQ,SBA
$PASHR,SBA,ON*09
Relevant Set
Command
$PASHS,SBA
SES: Session Programming
Function This command allows you to list the sessions programmed in
the receiver.
Command Format Syntax
$PASHQ,SES[*cc]
Parameters
None.
Response Format Syntax
The message returned by this command is described through
the example below:
$PASHQ,SES
START END INT
Parameter Description Range
s
ON: SBAS satellites are being tracked and used
OFF: SBAS satellites not tracked
ON, OFF
*cc Checksum *00-*FF