Reference Manual Instruction Manual

618
Query Command Library
Parameters
Example $PASHQ,RFM
$PASHR,RFM,Y*58
Relevant Set
Command
$PASHS,RFM
RFT: Record File Type for Meteo & Tiltmeter Data
Function This command allows you to read the file format used when
collecting meteorological and tiltmeter data.
Command Format Syntax
$PASHQ,RFT[*cc]
Parameters
None.
Response Format Syntax
$PASHR,RFT,d*cc
Parameter Description Range
s1
Status of the ring file memory:
• Y: Use of ring file memory enabled: The oldest raw data
files will be deleted automatically when only 15 Mbytes of
free memory are left in the receiver.
• N: Use of ring file memory disabled: Whether raw data
files are logged through sessions, or outside of sessions
($PASHS,REC), the logging of raw data files will stop
when there is no free space left in the memory used.
ON, OFF
*cc Checksum *00-*FF