Reference Manual Instruction Manual

614
Query Command Library
$PASHQ,RDP,PWR,A
$PASHR,RDP,PWR,NONE,0*7B
RDP,TYP: Radio Type Used
Function This command is used to query the type of radio used on the
specified port.
Command Format Syntax
$PASHQ,RDP,TYP,c1[*cc]
Parameters
Response Format Syntax
$PASHR,RDP,TYP,c1,s2*cc
Parameters
Examples
If an external radio transmitter P/N800986 is used:
Parameter Description Range
c1 Serial port used to communicate with the radio A, B, D, F
*cc Optional checksum *00-*FF
Parameter Description Range
c1
The port ID you specified in the command is
replicated in this field
A, B, D, F
s2
Radio Model:
• UNKNOWN: Auto-detection (port D only)
• NONE: No radio
• PDL: Pacific Crest PDL HPB/LPB (external,
port A, B or F)
• ADL: Pacific Crest ADL Vantage (Pro)
(external, port A, B or F), Pacific Crest ADL
Foundation (internal, port D)
• MGL: Radio transmitter P/N 800986
• MDL: U-Link
• LFE: License-free radio, Europe
(ARF7474B)
• LFA: License-free radio, North America
(ARF7474A)
Port A: NONE,
PDL, MGL, MDL,
LFE, LFA, ADL,
XDL.
Port D:
UNKNOWN,
NONE, MDL or
ADL.
Ports B, F: NONE,
PDL, XDL, LFE,
LFA or ADL.
*cc Checksum *00-*FF