Reference Manual Instruction Manual

606
Query Command Library
RDP,CHT: Radio Channel Table
Function This command is used to read the radio channel settings.
Command Format Syntax
$PASHQ,RDP,CHT,c1[*cc]
Parameters
Response Format Syntax
$PASHR,RDP,CHT,s1,d2,n(d3,f4,f5)*cc
Or, if the channel table does not exist: $PASHR,RDP,CHT,s1,0
(Here n=d2)
Parameter Description Range
c1
Serial port used to communicate with the radio (A, B
or F for external radio, D for internal radio)
A, B, F, D
*cc Optional checksum *00-*FF