Reference Manual Instruction Manual

603
Query Command Library
Relevant Set
Command
$PASHS,RAW
RCP: Receiver Parameters
Function This command returns the list of pre-defined receiver names,
and for user-defined receivers, their GLONASS carrier phase
biases.
Command Format Syntax
$PASHQ,RCP[*cc]
or
$PASHQ,RCP,s1[*cc]
Parameters
Response Format The response is in user-readable form.$PASHQ,RCP
PREDEFINED RECEIVER LIST (d1):
ASHTECH ProMark800
ProFlex800 MB500
PM5 MMapper100
ProMark100 ProMark200
MB100 NOVATEL
TRIMBLE SEPTENTRIO
TOPCON
USERDEFINED RECEIVER LIST (d2):
RCV10 RCV11
RCV12 RCV13
…
OWN RECEIVER: ProFlex800
REFERENCE RECEIVER:
RECEIVED RECEIVER:
2 1200 9 115200
3 2400 10 230400
4 4800 11 460800
5 9600 12 921600
6 19200 13 1428571
Code Baud Rate
Code
Baud Rate
Parameter Description Range
s1
Name of the receiver (case sensitive).
If s1 is omitted, the parameters for all the receiv-
ers described in the database are listed.
31 characters
max.
*cc Checksum *00-*FF