Reference Manual Instruction Manual

593
Query Command Library
Parameters
Example
$PASHQ,PEM
$PASHR,PEM,9*39
Relevant Set
Command
$PASHS,PEM
See also $PASHQ,ELM
PHE: Active Edge of Event Marker Pulse
Function This command is used to read the current choice of active
edge for the event marker pulse (photogrammetry).
Command Format Syntax
$PASHQ,PHE[*cc]
Response Format Syntax
$PASHR,PHE,c*cc
Parameters
Example
$PASHQ,PHE
$PASHR,PHE,R*57
Relevant Set
Command
$PASHS,PHE
Parameter Description Range
d1 Elevation mask angle 0-90°
*cc Checksum *00-*FF
Parameter Description Range
c
Active edge:
•R: Rising
• F: Falling
R, F
*cc Checksum *00-*FF