Reference Manual Instruction Manual

581
Query Command Library
Example
$PASHQ,MET
MET PARAMETERS SETTINGS
PRTA:OFF INIT_STR:NO TRIG_CMD:*0100P9 INTVL:0005
PRTB:OFF INIT_STR:NO TRIG_CMD:*0100P9 INTVL:0005
PRTF:OFF INIT_STR:NO TRIG_CMD:*0100P9 INTVL:0005
See Also $PASHS,MET,PAR
$PASHS,MET,INIT
$PASHS,MET,CMD
$PASHS,MET,INTVL
MWD: Modem Watchdog Timeout
Function This command is used to query the current setting for the
modem watchdog timeout.
If no data is received or sent through its port over a period of
time equal to this timeout, the modem will automatically
hang up.
Command Format Syntax
$PASHQ,MWD[*cc]
Response Format Syntax
$PASHR,MWD,d1,d2*cc
Parameters
Example
$PASHQ,MWD
$PASHR,MWD,0*36
Parameter Description Range Default
d1
Current timeout setting:
• 1-99: Modem timeout in minutes.
• 0: No timeout
0-99 0
d2 Current idle time for modem, in minutes. 0-99
*cc Checksum *00-*FF