Reference Manual Instruction Manual

576
Query Command Library
Parameters
None.
Response Format Syntax
$PASHR,LTZ,d1,d2*cc
Parameters
Example
$PASHQ,LTZ
$PASHR,LTZ,-5,8*xx
Relevant Set
Command
$PASHS,LTZ
MDM: Modem Status and Parameters
Function This command is used to query the modem parameters.
Command Format Syntax
$PASHQ,MDM[*cc]
Response Format Syntax
$PASHR,MDM,c1,d2,s3,PWR=s4,PIN=s5,BND=d6,PTC=d7,CBS=d8,APN=
s9,LGN=s10,PWD=s11,IPT=d12,PHN=s13,ADL=c14,RNO=d15,MOD=s16,N
ET=d17*cc
Parameters
Parameter Description Range
d1 Local time zone, in hours -13 to +13
d2 Local time zone, in minutes 0-59
*cc Checksum *00-*FF
Parameter Description Range
c1 Modem port E
d2 Modem baud rate 9
s3
Modem state
“NONE” means that the modem
option [Z] is not valid.
OFF, ON, INIT, DIALING,
ONLINE, NONE