Reference Manual Instruction Manual

555
Query Command Library
See also $PASHS,REC
$PASHS,FIL,D
$PASHS,MEM
FTP: FTP Status and Settings
Function This command is used to query the status and settings of the
FTP server used to upload files from the receiver.
Command Format Syntax
$PASHQ,FTP[*cc]
Parameters
None.
Response format Syntax
$PASHR,FTP,s1,d2,d3,s4,d5,d6,ADD=s7,PRT=d8,LGN=s9,PWD=s10,
PTH=s11,IPP=c12*cc
Parameters
Example
$PASHQ,FTP*35
Parameter Description Range
s1
File transfer status:
• NONE: no transfer to FTP
• PUT: File being uploaded to FTP
NONE, PUT
d2 Number of files to be transferred 0-255
d3 Number of files already transferred 0-255
s4 Name of the file being transferred 255 characters max.
d5 Size, in bytes, of the file being transferred 0-134217728
d6
Percentage of data already transferred for
the file transfer currently in progress.
0-100
ADD=s7 FTP server IP address or host name
PRT=d8 FTP server port number 0-65535
LGN=s9 FTP server login 32 characters max.
PWD=s10 FTP server password 32 characters max.
PTH=s11 Path used on the FTP server 255 characters max.
IPP=c12
Internet port used for FTP transfer:
• E: Internal modem
• P: Ethernet cable
E, P
*cc Checksum *00-*FF