Reference Manual Instruction Manual

541
Query Command Library
Parameters
Example
$PASHQ,DRI
$PASHR,DRI,1.00*18
Relevant Set
Command
$PASHS,DRI
See also $PASHQ,ATM
$PASHQ,REC
DST: Connection Modes for the Different Data Streams Available
Function This command allows you to read the current settings for
each of the Ix ports on which data streams have potentially
been enabled.
Command Format Syntax
$PASHQ,DST[,s][*cc]
Parameters
Response format Syntax
$PASHQ,DST,d1,s2,s3,d4,d5,d6,s7*cc
Parameters
Parameter Description Range
f1 Current raw data recording rate
0.05 s
0.1-0.9 s
1-999 s
*cc Checksum *00-*FF
Parameter Description Range
s
Interrogated data stream port. If s is omitted, the current
settings of all the ports are listed.
I1-I9
*cc Optional checksum *00-*FF
Parameter Description Range
d1 Number of data streaming ports 9