Reference Manual Instruction Manual

535
Query Command Library
The f4 to f6 cordinates will be empty with the heading mode
activated.
See also $PASHS,NME
$PASHS,NPT
DDN: DynDNS Parameters
Function This command is used to query the receiver for the current
DynDNS settings.
Command Format Syntax
$PASHQ,DDN[*cc]
Response Format Syntax
$PASHR,DDN,DYN=d1,SYS=s2,USR=s3,PWD=s4,HNM=s5,PER=d6*cc
Parameters
Example
$PASHQ,DDN
$PASHR,DDN,DYN=1,SYS=[e-mail],USR=psmith,PWD=ashtec
h,HNM=ashtech1.dyndns.org,PER=600*62
See also $PASHS,DDN,PAR
Parameter Description Range
DYN=d1
Current DynDNS service status:
• d1=0: Enabled
• d1=1: Disabled
0, 1
SYS=s2 Address of the free service used. 100 characters max.
USR=s3
Username chosen when creating an account
on the DynDNS web site.
32 characters max.
PWD=s4
Password chosen when creating an account
on the DynDNS web site.
32 characters max.
HNM=s5
Hostname declared on the DynDNS web site
for the receiver.
100 characters max.
PER=d6 Update rate, in seconds. 60-3600
*cc Optional checksum *00-*FF