Reference Manual Instruction Manual

532
Query Command Library
Example
$PASHQ,CST
$PASHS,CST,ON,124.65.65.12,2102,NTRIP Caster ProFlex800,
Ashtech,FRA,47.10,-1.00,123.12.132.12,2101,My Network,Ashtech,
Y,www.ashtech.com, www.ashtech.com, [e-mail]*53
See also $PASHS,CST
$PASHS,CST,USR,ADD
$PASHS,CST,USR,DEL
CTS: Handshaking
Function This command allows you to query the handshaking (RTS/
CTS) protocol status. If no port is specified in the command,
the response message is sent back to the port that issued the
query command.
Command Format Syntax
$PASHQ,CTS[,s1][*cc]
Response Format Syntax
$PASHR,CTS,s1,s2*cc
Parameters
Example
$PASHQ,CTS
$PASHR,CTS,ON*1D
s16
Web address where network information can
be found.
100 characters max
s17
Web address where data stream information
can be found.
100 characters max
s18
Web or email address where registration
information can be found.
100 characters max
*cc Optional checksum *00-*FF
Parameter Description Range
Parameter Description Range
s1 Queried port A, B, F
s2 Current status of RTS/CTS handshaking protocol ON, OFF
*cc Checksum *00-*FF