Reference Manual Instruction Manual

495
Set Command Library
This mode delivers the best possible estimates in terms of
accuracy. Estimates may however be affected if the data
link experiences delays or outages.
Example
Enabling Fast output mode:
$PASHS,VEC,FST*48
WAK: Acknowledging Alarms
Function This command is used to acknowledge all alarms. This will
also turn off the beeper (if previously set to beep on
occurrence of an alarm). After sending the command, all
alarms will switch from the “current” to the acknowledged
(“pending”) status.
Command Format Syntax
$PASHS,WAK[*cc]
Parameters
None.
Example
Acknowledging all alarms:
$PASHS,WAK*28
Relevant Query
Command
$PASHQ,WARN
WEB,OWN: Setting Owner Information
Function This command is used to define the owner information
displayed on the home page of the Web Server.
Command Format Syntax
$PASHS,WEB,OWN,s1,s2,s3,s4[*cc]