Reference Manual Instruction Manual

492
Set Command Library
USR,TXT: Entering text for User Message Type “TXT”
Function: This function is used to enter the text that will be inserted
into the “TXT” user message, as defined through
$PASHS,NME (command run with s1= USR) and
$PASHS,USR,TYP (command run with s= TXT).
Command Format Syntax
$PASHS,USR,TXT,s[*cc]
Parameters
Example
$PASHS,USR,TXT,”this the text of the user message”
Relevant Query
Command
$PASHQ,USR,TXT
See Also $PASHS,NME
$PASHS,USR,TYP
UTS: Synchronizing Onto GPS Time
Function: This function is used to enable or disable a clock steering
mechanism that synchronizes measurements and coordinates
with the GPS system time rather than with the local (receiver)
clock.
Command Format Syntax
$PASHS,UTS,s1[*cc]
Parameter Description Range
s User message text Up to 80 characters between double quotes
*cc Optional checksum *00-*FF