Reference Manual Instruction Manual

483

Set Command Library

TLT,INTVL: Defining the Time Interval to Acquire Tiltmeter Data

Function This command is used to define the time interval through

which the receiver will regularly ask the tiltmeter to return its

data. The command also specifies the ID of the receiver port

used to communicate with the tiltmeter.

By default, the receiver will query the tiltmeter every second

once the receiver has notified the tiltmeter, through the

$PASHS,OUT,x,TLT,ON command, to start operating.

Command Format Syntax

$PASHS,TLT,INTVL,c1,d2[*cc]

Parameters

Example

Setting query interval to 10 seconds, tiltmeter on port F:

$PASHS,TLT,INTVL,F,10*1B

Relevant Query

Command

$PASHQ,TLT