Reference Manual Instruction Manual

482

Set Command Library

TLT,INIT: Defining the String Used to Initialize the Tiltmeter

Function This command is used to define the character string that will

initialize the tiltmeter. The command also specifies the ID of

the receiver port used to communicate with the tiltmeter.

The initializing string is in the form “*xxxxxx”. There is no

initialization string defined by default.

Command Format Syntax

$PASHS,TLT,INIT,c1,s2[*cc]

Parameters

Example

Setting initialization string to “*9900ID”, tiltmeter

connected to port F:

$PASHS,TLT,INIT,F,9900ID*44

Relevant Query

Command

$PASHQ,TLT