Reference Manual Instruction Manual

481

Set Command Library

$PASHS,ETH

TLT,CMD: Defining the Trigger String Used to Query the Tiltmeter

Function This command is used to define the character string that will

query the tiltmeter. The command also specifies the ID of the

receiver port used to communicate with the tiltmeter.

The trigger string is in the form “*xxxxxx” and the default one

is *0100XY.

Command Format Syntax

$PASHS,TLT,CMD,c1,s2[*cc]

Parameters

Example

Setting trigger string to “*0100XY”, tiltmeter connected to

port F:

$PASHS,TLT,CMD,F,0100XY*19

Relevant Query

Command

$PASHQ,TLT