Reference Manual Instruction Manual

465
Set Command Library
DEL,d7
G-file deletion:
• 0: Keep G-file after RINEX conversion
• 1: Delete G-file after RINEX conversion
0-1 1
MOV,d8
File moved to subdirectory:
•0: No move
• 1: Move converted files only
• 2: Move original and converted files
0-2 1
DST,d9
Memory where to move the files:
• 0: Internal memory
• 2: USB key
0, 2 0
PTH,s10
Format of the subdirectory where files are
moved (see comments below).
Y/D
FTP,d11
Automatic FTP transfer
• 0: No transfer
• 1: Automatic transfer to FTP server
• 2: Automatic transfer to FTP server, fol-
lowed by deletion of the file if d8=1 or 2
See $PASHS,SES,FTP,PAR for FTP settings.
0, 1, 2 0
RFM,c12
Ring file memory management:
• N (No): Sessions stopped when memory
full
• Y (Yes): Oldest file removed when free
memory is less than 15 Mbytes.
Y, N N
SLP,c13
Enable/disable sleep mode:
• No: The receiver won’t be powered off
between sessions
• Yes: The receiver will be powered off
between sessions. Power will be restored
automatically 15 minutes before the next
session starts.
Y, N N
GLO,s14
GLONASS data conversion:
• ON: GLONASS measurements will be con-
verted.
• OFF: GLONASS measurements will not be
converted.
ON, OFF ON
SBA,s15
SBAS data conversion:
• ON: SBAS measurements will be con-
verted.
• OFF: SBAS measurements will not be con-
verted.
ON, OFF ON
GAL,s16
GALILEO data conversion:
• ON: GALILEO measurements will be con-
verted.
• OFF: GALILEO measurements will not be
converted.
ON, OFF ON
PER,d17
Period of RINEX measurements, in seconds.
“0” means the period used is the same as
that used in the G-file.
0-60 0
Parameter Description Range Default