Reference Manual Instruction Manual

463
Set Command Library
Relevant Query
Command
$PASHQ,SES
See Also $PASHS,SES,PAR
SES,ON: Starting Sessions
Function This command is used to start the execution of the
programmed sessions. By default all the sessions are
stopped.
Command Format Syntax
$PASHS,SES,ON[*cc]
Parameters
None.
Example
Starting the programmed sessions:
$PASHS,SES,ON*1D
Relevant Query
Command
$PASHQ,SES
See also $PASHS,SES,OFF
$PASHS,SES,PAR
SES,OFF: Stopping Sessions
Function This command is used to stop the execution in progress of the
programmed sessions. By default all the sessions are
stopped.
Command Format Syntax
$PASHS,SES,OFF[*cc]
Parameters
None.