Reference Manual Instruction Manual

460
Set Command Library
SES,FTP,PAR: Setting FTP Server for Record Files
Function This command is used to define the parameters of the FTP
server where the receiver will automatically upload all the
data files recorded during sessions (primary FTP server). A
backup FTP server can also be defined through this
command.
Command Format Syntax
$PASHS,SES,FTP,PAR[,ADD,s1][PRT,d2][,LGN,s3][,PWD,s4][,PTH,s5]
[,SUB,s6][,IPP,c7][,BKP,d8][,AD2,s9][,PR2,d10][,LG2,s11][,PW2,s12]
[,PT2,s13][*cc]