Reference Manual Instruction Manual

455

Set Command Library

Parameters

Comments

• The headers of the RINEX files are built using the

information provided through $PASHS,RXC,PAR.

• The resulting RINEX files are stored in the same folder as

the one containing the G-file specified in the command.

• $PASHR,NAK is returned if the specified file does not

exist, or is not a G-file.

• $PASHR,ACK is returned when the command is accepted,

then $PASHR,RXC,OK or $PASHR,RXC,FAILED,

depending on whether the conversion respectively

succeeded or failed.

Examples

Converting a G-file to Rinex (in the same folder):

$PASHS,RXC,RUN,,,GabcdA09.241*67

$PASHR,ACK*3D

$PASHR,RXC,OK*15

Converting a G-file to Rinex and saving the resulting file in a

sub-folder:

$PASHS,RXC,RUN,2,2009/241,GabcdA09.241*46

$PASHR,ACK*3D

$PASHR,RXC,OK*15

Relevant Query

Command

None.