Reference Manual Instruction Manual

454
Set Command Library
Comments
The “comments” fields (s11-s16) may consist of several lines
each. The line separator in this case is composed of two
characters: \n. Each line may contain up to 60 characters.
Example
Setting the RINEX converter to produce RINEX 2.11-
Hatanaka, TarZ-compressed files:
$PASHS,RXC,PAR,VER,1,CMP,1,GLO,OFF,SBA,OFF,GAL,OFF,AGY,Ashte
ch,OBN,Peter Smith,MNM,CARQ,MNB,1005M001*4A
Relevant Query
Command
$PASHQ,PAR,RXC
See Also $PASHS,SES,PAR
$PASHS,RXC,RUN
RXC,RUN: Converting a G-File into RINEX Files
Function This command is used to convert a G-file into RINEX files.
Command Format Syntax
$PASHS,RXC,RUN,[d1],[s2],s3[*cc]
AHR,f21
Accuracy of HR (relative humidity in
percent)
0.0-100.0 0.0
*cc Optional checksum *00-*FF
Parameter Description Range Default