Reference Manual Instruction Manual

453
Set Command Library
Parameters
Parameter Description Range Default
VER,d1
RINEX version:
• 0: RINEX 2.11
• 1: RINEX 2.11-Hatanaka
• 2: RINEX 3.01
• 3: RINEX 3.01-Hatanaka
10-3
CMP,d2
Compression:
•0: None
•1: TarZ
10-1
PER,d3
RINEX measurement period:
• 0: Period specified in G-file is used
• Other than 0: is the RINEX mea-
surement period actually used, in
seconds
00-60
GLO,s4
GLONASS conversion:
• ON: GLONASS measurements are
converted
• OFF: GLONASS measurements
are ignored
ON ON, OFF
SBA,s5
SBAS conversion:
• ON: SBAS measurements are con-
verted
• OFF: SBAS measurements are
ignored
ON ON, OFF
GAL,s6
GALILEO conversion:
• ON: Galileo measurements are
converted
• OFF: Galileo measurements are
ignored
OFF ON, OFF
AGY,s7 Agency name 20 char. max.
OBN,s8 Observer name 20 char. max.
MNM,s9 Antenna marker name 60 char. max.
MNB,s10 Antenna marker number 20 char. max.
OBS,s11 Observation file comments 255 char. max.
GPN,s12 GPS Navigation file comments 255 char. max.
GLN,s13 GLONASS Navigation file comments 255 char. max.
SBN,s14 SBAS Navigation file comments 255 char. max.
GAN,s15 GALILEO Navigation file comments 255 char. max.
MET,s16 Meteo file comments 255 char. max.
SSM,s17 Sensor model 20 char. max.
SST,s18 Sensor type 20 char. max.
APR,f19 Accuracy of PR (pressure in mbar) 0.0-100.0 0.0
ATD,f20
Accuracy of TD (dry temperature in
degrees Celsius
0.0-100.0 0.0