Reference Manual Instruction Manual

448

Set Command Library

• IP address

• Sub-network mask

• Gateway IP address

• DNS 1 IP address

DNS 2 IP

addressRelevant

Query Command

None.

See also $PASHS,INI

RTC,MSG: Defining a User Message

Function This command is used to input a user message that a base

will be able to forward to a rover through RTCM message type

16, 36 or 1029. This command can only be applied to a base

receiver with message type 16 or 1029 enabled in the

receiver.

Command Format Syntax

$PASHS,RTC,MSG,s[*cc]

Parameters

Example

Submitting a user message:

$PASHS,RTC,MSG,<user message 90 characters max>

Relevant Query

Command

None.