Reference Manual Instruction Manual

439
Set Command Library
Examples
Setting the internal Pac Crest radio receiver:
$PASHS,RDP,PAR,D,PDL,2,AUT,0,9600,LOW,0,0*75
Setting the internal U-Link Rx:
$PASHS,RDP,PAR,D,MDL,0,AUT,0,9600,LOW*6A
Setting the external U-Link TRx:
$PASHS,RDP,PAR,A,MGL,1*46
Relevant Query
Command
$PASHQ,RDP,PAR
See also $PASHS,RDP,ON
$PASHS,RDP,OFF
$PASHS,RDP,TYP
$PASHQ,RDP, CHT
RDP,TYP: Defining the Type of Radio Used
Function This command is used to set manually the type of radio
connected to the specified port. Normally, the type of internal
radio (typically connected to port D) is detected
automatically.
Command Format Syntax
$PASHS,RDP,TYP,c1,s2[*cc]
2 869.600 (manufacturer’s channel 85)
Channel Number Frequency (MHz)