Reference Manual Instruction Manual

31
Receiver Description
• Field Software
– FAST Survey
– Survey Pro
–RTDS
• Office Software
–GNSS Solutions
– Survey Office
Certifications • R&TTE directive compliant (CE)
•FCC/IC
Firmware Options
The available firmware options are summarized in the table
below. Some are pre-installed, some others need to be
purchased.
ID Designation Description P/N
S GLONASS
Enables the use of signals from the GLON-
ASS constellation
680500
O GALILEO Enables the reception of GALILEO satellites 680655
Q GNSSL5 Enables the reception of the L5 frequency 680656
KRTK
Allows a base to generate and send RTK cor-
rections.
Allows a rover to compute RTK position solu-
tions using corrections received from a base
(unlimited RTK).
680502
F FASTOUTPUT Allows position output at a rate of up to 20 Hz 680527
R FLYING RTK RTK computation (Flying RTK mode only) 680635
C CASTER Embedded NTRIP caster 680636
ZMODEM
Enables the use of the internal GSM/GPRS
modem
680528
LRTK3
For a rover, limits the RTK range to 3 km.
(Not available for ProFlex 800 CORS)
Pre-installed
MRTK2
Allows a rover to deliver RTK positions using
corrections in DBEN, ATOM or LRK format.
Allows a base to generate ATOM corrections.
Pre-installed
NSTA
Enables a base receiver to generate RTCM,
CMR or ATOM corrections data
Pre-installed
P GNSSL2 Enables the reception of the L2 frequency Pre-installed