Reference Manual Instruction Manual

424

Set Command Library

PRT: Setting Baud Rates

Function This command is used to set the baud rate of any of the serial

ports used in the receiver (except port C).

Command Format Syntax

$PASHS,PRT,c1,d2[*cc]

Parameters

Port A can operate in RS422 mode up to 1 428 571 Bd with

any particular precaution. For higher speeds, shorter

connections should be used. This is also true for all RS232

ports (A, B and F) for speeds higher than 115 200 Bd.

Example

Setting port A to 19200 Bd:

$PASHS,PRT,A,6

Relevant Query

Command

$PASHQ,PRT