Reference Manual Instruction Manual

421

Set Command Library

Parameters

Example

Making the falling edge active:

$PASHS,PHE,F*42

Relevant Query

Command

$PASHQ,PHE

See Also $PASHS,NME,TTT

POP: Setting Internal Update Rate for Measurements and PVT

Function This command allows you to set the updates rate used

internally in the measurements and position processing.

Command Format Syntax

$PASHS,POP,d[*cc]

Parameters

Example

Setting the update rate to 10 Hz:

$PASHS,POP,20*17

Comments

• Outputting data at 20 Hz through $PASHS,NME,

$PASHS,ATM and $PASHS,RAW requires that the present

update rate stays at 20 Hz (default value).

Parameter Description Range Default

Active edge code:

• “R” for rising edge

• “F” for falling edge

R, F R

*cc Optional checksum *00-*FF

Parameter Description Range Default

Internal update rate, in Hz, for measure-

ments and PVT.

10, 20 20

*cc Optional checksum *00-*FF