Reference Manual Instruction Manual

403

Set Command Library

MET,INTVL: Query Time Interval for Meteo Data

Function This command is used to define the time interval through

which the receiver will regularly ask the meteorological unit

to return the current values of meteo data. The command also

specifies the ID of the receiver port used to communicate

with the meteorological unit.

By default, the receiver will query the meteorological unit

every 5 seconds once the receiver has notified the

meteorological unit, through the $PASHS,OUT,x,MET,ON

command,to start operating.

Command Format Syntax

$PASHS,MET,INTVL,c1,d2[*cc]

Parameters

Example

Setting query interval to 10 seconds:

$PASHS,MET,INTVL,A,10*0C

Relevant Query

Command

$PASHQ,MET