Reference Manual Instruction Manual

390
Set Command Library
$PASHS,GAL,ON*12
Relevant Query
Command
$PASHQ,GAL
$PASHQ,PAR
See also $PASHS,CFG
$PASHS,SBA
$PASHS,GPS
$PASHS,GLO
GLO: GLONASS Tracking
Function This command is used to enable or disable GLONASS
tracking. The command is valid only if the GLONASS option
has been activated in the receiver.
Command Format Syntax
$PASHS,GLO,s1[*cc]
Parameters
Example
Enabling GLONASS:
$PASHS,GLO,ON*1C
Relevant Query
Command
$PASHQ,GLO
See also $PASHS,SBA
$PASHS,CFG
$PASHS,GPS
$PASHS,GAL
Parameter Description Range Default
s1
Enables (ON) or disables (OFF) GLONASS
tracking.
ON, OFF ON
*cc Optional checksum *00-*FF