Reference Manual Instruction Manual

389
Set Command Library
$PASHR,ACK*3D
• After a successful file transfer, the following response line
is returned:
$PASHR,FTP,OK*1E
• If the file transfer fails, the following response line is
returned:
$PASHR,FTP,FAIL*18
• If you submit a new command while a file transfer
sequence is still in progress, your new command is
rejected and the following response line is returned:
$PASHR,FTP,BUSY*07
Relevant Query
Command
$PASHQ,FTP
See Also $PASHS,FTP,PAR
GAL: Galileo Tracking
Function This command is used to enable or disable Galileo tracking.
Command Format Syntax
$PASHS,GAL,s1[*cc]
Parameters
Comments
The command is NAKed if the [O] option is not installed or
the receiver does not support Galileo.
Example
Enabling Galileo:
Parameter Description Range Default
s1
Enabling/disabling Galileo tracking:
• On: Track and use Galileo satellites
• Off: Do not track Galileo satellites
ON, OFF OFF
*cc Optional checksum *00-*FF -