Reference Manual Instruction Manual

375
Set Command Library
EFT,OFF: Stopping Embedded FTP Server
Function This command stops the embedded FTP server after it has
been started. By default, the embedded FTP server is
inactive.
Command Format Syntax
$PASHS,EFT,OFF[*cc]
Parameters
None.
Example
Stopping the embedded FTP server:
$PASHS,EFT,OFF*41
Relevant Query
Command
$PASHQ,EFT
See Also $PASHS,EFT,ON
$PASHS,EFT,PAR
EFT,PAR: Embedded FTP Server Settings
Function This command is used to enter the different parameters of
the embedded FTP server.
Command Format Syntax
$PASHS,EFT,PAR[,LGN,s1][,PWD,s2][,MEM,d3][,PTH,s4][,PRT,d5][*cc]