Reference Manual Instruction Manual

Receiver Description

Follow the

instructions below to

charge a

battery.

Removing

the Battery from

the ProFlex 800

Unless the battery has already been taken out, do the

following:

• Open the battery trapdoor, accessible from above the

ProFlex 800, by lifting and then turning the quarter-turn

finger screw anticlockwise. This releases the two springs

located under the battery, pushing the battery slightly

upward (see picture).

• Grab the battery and take it out of the compartment.

Charging the

Battery

The battery charger comes with a separate universal AC

adapter fitted with a 1.5-m output cable. The AC adapter

includes a choice of four different, detachable plug types.

Follow the instructions below to operate the charger.

• Choose the plug type that is suitable for your country.

• Secure that plug on the AC adapter.

• Connect the cable from the AC adapter to the battery

charger.

• Give the battery the right orientation with respect to the

charger [1] (the battery terminals should come into

contact with the two sets of connectors on the charger),

then push the battery against the plate and slide it forward

[2] until it locks into place.