Reference Manual Instruction Manual

365

Set Command Library

Parameters

Examples

Establishing the programmed Direct IP connection:

$PASHS,DIP,ON*05

Relevant Query

Command

$PASHQ,MDM

See also $PASHS,DIP

$PASHS,DIP,PAR

$PASHS,DIP,OFF

DIP,PAR: Setting Direct IP Parameters

Function This command is used to set the different parameters

allowing the receiver to perform a Direct IP connection to an

external server, typically a base.

Command Format Syntax

$PASHS,DIP,PAR,ADD,s1,PRT,d2[,LGN,s3,PWD,s4][,IPP,c5][*cc]

Parameter Description Range

IP port used for the connection to the server:

• E: Internal modem

• P: Ethernet stream 1

• Q: Ethernet stream 2

When c1 is omitted, the concerned port is

the one specified in the last $PASHS,DIP,

PAR or $PASHS,DIP command run.

E, P, Q

*cc Optional checksum *00-*FF